Shop | Mücková / Mück

Our online shop features the current selection of camshafts.
For modifications or manufacture of camshafts for other engine types, please contact us by email.
Our online shop also offers special parts for performance modifications to TAZ engines in firefighting pumps.
All offered parts are Czech originals, not cheap replacements.
Volume discounts for engine tuners on request.
WE ARE NOT VAT PAYERS

CamshaftsŠKODA OHV

Škoda OHV camshaft

Regrinding or manufacture of a new camshaft for the Škoda 105–136, Favorit or Felicia.

Škoda OHV camshaft with valve springs and retaining screw

Regrind Intended for sportier driving on public roads. For regrinding, supply a clean Škoda Felicia 1.3 50 kW camshaft.

Manufacture Intended for racing, manufactured from solid stock. M10x25 left-hand thread; a new camshaft includes a high-strength M10x25 socket-head screw with a left-hand thread.

Installation instructions

Delivery includes installation instructions: recommended compression ratio, valve clearances and timing.

Operation	Cam duration	Max. lift	Price
Regrind	262° / 248°	6,4 / 5,8 mm	5 600 CZK
KOM version	262° / 248°	6,4 / 5,8 mm	5 600 CZK
Regrind	272° / 266°	6,6 / 6,4 mm	5 600 CZK
TOP version	272° / 266°	6,6 / 6,4 mm	5 600 CZK
Manufacture	294° / 294°	7,2 / 7,2 mm	11 400 CZK
Sprints, road use with two twin-choke Weber carburettors (short intake)	294° / 294°	7,2 / 7,2 mm	11 400 CZK
Manufacture	316° / 316°	7,5 / 7,5 mm	11 400 CZK
Circuit racing, hill climbs	316° / 316°	7,5 / 7,5 mm	11 400 CZK
Manufacture	320° / 320°	8,0 / 8,0 mm	13 200 CZK
Road use with two twin-choke Weber carburettors (short intake); stiffer valve springs required (included in the price)	320° / 320°	8,0 / 8,0 mm	13 200 CZK
Manufacture	324°/ 324°	7,5 / 7,2 mm	11 400 CZK
130 LR / RS with two twin-choke Weber carburettors (curved intake runners)	324°/ 324°	7,5 / 7,2 mm	11 400 CZK
Bearings *	This field is mandatory.
Engine type *	This field is mandatory.
Bore (mm) *	Enter a number greater than zero.
Stroke (mm) *	Enter a number greater than zero.
Rocker arm ratio *	Enter a number greater than zero.
Exhaust valve head diameter (mm) *	Enter a number greater than zero.
Intake valve head diameter (mm) *	Enter a number greater than zero.

CamshaftsTAZ

TAZ camshaft

Regrinding or manufacture of a new TAZ camshaft.

Regrind For regrinding, supply a clean TAZ 1500 camshaft with no wear at the cam-lobe tips. If the supplied camshaft is excessively worn, nitriding is required - price on request.

Manufacture Machined from solid stock, suitable for large-displacement performance engines.

Installation instructions

Delivery includes installation instructions: recommended compression ratio, valve clearances and timing.

Operation	Cam duration	Max. lift	Price
Regrind	258° / 248°	6,4 / 5,8 mm	4 400 CZK
Suitable for TAZ 1.43 to 1.6 engines	258° / 248°	6,4 / 5,8 mm	4 400 CZK
Regrind	278°/ 272°	7,0 / 6,6 mm	4 400 CZK
Suitable for TAZ 1.8 engines	278°/ 272°	7,0 / 6,6 mm	4 400 CZK
Manufacture	284° / 284°	7,0 / 7,0 mm	11 500 CZK
Suitable for TAZ 1.9 engines (slightly worn camshaft)	284° / 284°	7,0 / 7,0 mm	11 500 CZK
Manufacture	284° / 284°	8,0 / 8,0 mm	15 500 CZK
Suitable for TAZ 2.0 and larger engines	284° / 284°	8,0 / 8,0 mm	15 500 CZK
Bore (mm) *	Enter a number greater than zero.
Stroke (mm) *	Enter a number greater than zero.
Exhaust valve head diameter (mm) *	Enter a number greater than zero.
Intake valve head diameter (mm) *	Enter a number greater than zero.

TAZ

Tuned exhaust manifold

Blog: TAZ 1.43 / PS12

Specification Price / pc.

TAZ 1.43 6 600 CZK

TAZ 2.0 and larger 6 600 CZK

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Resonance exhaust

Resonance exhaust mounted on the stock cast-iron manifold.

TAZ

Forged H-beam Connecting Rod

Specification Price / set

160 mm – stock length 12 500 CZK

156 mm – suitable for engines with a weld-built crankshaft 11 500 CZK

156 mm – suitable for engines with an “Engitec” crankshaft 12 500 CZK

Number of sets *

Enter a whole number from 1 to 9999. Maximum 9999 sets of each option per order.

TAZ

Ignition coil

Specification Price / pc.

For contact ignition 780 CZK

For contactless ignition 1 100 CZK

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Distributor rotor with limiter

Modified for 4800–5100 rpm. Genuine Bosch / Facet / EPS part.

Specification Price / pc.

Distributor rotor with limiter Price on request

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Distributors – spare parts

Distributor spare parts for TAZ firefighting aggregate engines.

Specification Price / pc.

Distributor cap 260 CZK

High-voltage ignition leads 280 CZK

Bosch distributor contacts 150 CZK

PAL distributor condenser 180 CZK

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Cylinder head gasket

For engines with an enlarged bore; cylinder spacing 88-88-88 mm, thickness 1.5 mm.

Cylinder head gasket — Stock (silicone treatment)

Specification Price / pc.

For 80.5 mm bore 620 CZK

For 82 mm bore 620 CZK

For stock TAZ 1.43 (silicone) 160 CZK

Custom specification Price on request

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Ø82 mm cylinder, piston, ring, pin and circlip set

Prices are always for a complete engine (4 cylinders).

Ø82 mm cylinder, piston, piston rings and piston pin

Cylinder shims on request.

Specification Price / pc.

Complete set 18 000 CZK

Piston and piston-ring set 10 400 CZK

Piston-ring set 1 600 CZK

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Twin-choke 38/38 carburetor

Modification included, suitable for TAZ 2.0 and larger engines.

We recommend final tuning on an engine dynamometer (on request).

Specification Price / pc.

Twin-choke 38/38 carburetor 7 900 CZK

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

TAZ

Distributor overhaul and modification

Spare parts are not included in the price – contacts, condenser, coil and other components.

Czech-made distributors only – we cannot guarantee correct operation of Chinese or Polish copies.
Always supply washed and degreased parts for modification.

Specification Price / pc.

Overhaul and modification Approx. 1 600 CZK

Price depends on the scope of work

Quantity *

Enter a whole number from 1 to 9999. Maximum 9999 units of each option per order.

Order

* mandatory fields

Billing details

Full name * This field is mandatory. Company

Email * Enter a valid email. Phone Enter a valid phone number.

Invoice address

Street, house no. *

This field is mandatory.

City * This field is mandatory. Postal code * This field is mandatory. Country * This field is mandatory.

Delivery method

Delivery to a postal address PPL – pickup point DPD – pickup point

Delivery address is the same as the invoice address

Notes

ATTACH PHOTOS AND OTHER FILES (MAX 8MB)

Select file...BROWSE

Delivery is not included. Availability, delivery cost and the final price will be confirmed by email.

Your basket is empty. Choose a part to get started.

Your order and attachments will be emailed for processing. Only product selections are saved in this browser, not contact details or attachments.

Škoda OHV camshaft

Regrind

Manufacture

Installation instructions

TAZ camshaft

Regrind

Manufacture

Installation instructions

Tuned exhaust manifold

Resonance exhaust

Forged H-beam Connecting Rod

Ignition coil

Distributor rotor with limiter

Distributors – spare parts

Cylinder head gasket

Ø82 mm cylinder, piston, ring, pin and circlip set

Twin-choke 38/38 carburetor

Distributor overhaul and modification

Order

Billing details

Invoice address

Delivery method

Delivery address

Notes

ATTACH PHOTOS AND OTHER FILES (MAX 8MB)

Choose a PPL pickup point

Choose a DPD pickup point